systemsetting primarycamera
Gets or specifies which camera is the main camera.
Syntax
systemsetting primarycamera {1..4}
systemsetting get primarycamera
Parameter
Description
Returns the current setting.
get
Sets the specified input as the primary camera
1..4
(numbering convention matches the
numbering in the on-screen user interface).
Camera 3 and Camera 4 are available on
Polycom RealPresence Group 700 systems
only.
Feedback Examples
● systemsetting primarycamera 1
returns
systemsetting primarycamera 1
● systemsetting get primarycamera
returns
systemsetting primarycamera 1
Limitations
None
Comments
The systemsetting primarycamera command causes the system to restart.
The primary camera is active when the system initializes, and its source is automatically set to People.
Polycom, Inc.
System Commands
User
Accessible
Additional Restrictions
✓
372