Ldapserveraddress - Polycom RealPresence Group Series Reference Manual

ldapserveraddress

Gets or sets the LDAP server address.
Syntax
ldapserveraddress get
ldapserveraddress set ["address"]
Parameter Description
Returns the current setting.
get
Sets the IP address or the DNS name of an
set
LDAP server. To erase the current setting, omit
the "address" parameter.
Note: This parameter does not change the
setting on the server. Instead, this parameter
changes how the Polycom system recognizes
the server.
Specifies the IP address or the DNS name of
"address"
an LDAP server.
The DNS name requires alphanumeric
characters. Valid characters include:
0 through 9
a through z
A through Z
-
Note: The "-" character cannot be used as the
first or last character in the DNS name.
Feedback Examples
● ldapserveraddress get
returns
ldapserveraddress hardware.domain.polycom.com
● ldapserveraddress set software.domain.polycom.com
returns
ldapserveraddress software.domain.polycom.com
Limitations
None
Comments
None
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
269