Polycom RealPresence Group Series Reference Manual page 155

Parameter Description
Starts zooming out.
zoom-
Stops the movement of the near or far camera.
stop
Returns no feedback.
Returns the number of the near or far camera
source
source currently selected.
Gets the pan, tilt, and zoom coordinates of the
getposition
currently selected PTZ camera in the format of
pan tilt zoom.
Sets the pan (x), tilt (y), and zoom (z)
setposition
coordinates of the selected PTZ camera.
"x" "y" "z"
Camera PTZ range:
-50000 <= pan <= 50000
-50000 <= tilt <= 50000
-50000 <= zoom <= 50000
Notes:
The camera PTZ range applies to the Polycom
EagleEye HD camera. Different cameras might
have different PTZ values.
Some D30 cameras might not be able to reach
the full range limit. For example, although the
pan limit is 5000, the camera might only be able
to reach a nearby value.
Specifies People+Content IP as the main video
ppcip
source if it is running and connected to the
system.
Sets the source for the specified camera to
for-people
People. Camera 3 and Camera 4 are available
{1..4}
on RealPresence Group 700 systems only.
Sets the source for the specified camera to
for-content
Content. Camera 3 and Camera 4 are available
{1..4}
on RealPresence Group 700 systems only.
Gets a list of cameras configured as Content.
list-content
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
✓
✓
✓
✓
✓
✓
✓
✓
✓
164