Screen - Polycom RealPresence Group Series Reference Manual

screen

Returns the name of the current user interface screen on the system, registers or unregisters for screen
changes, or goes to a specific user interface screen.
Syntax
screen
screen register get
screen [register|unregister]
screen "screen_name"
Parameter Description
Returns the registration state for screen
get
change events when followed by the get
parameter.
Returns the name of the current user interface
screen
screen if not followed by other parameters.
Registers for user interface screen changes. In
register
register mode, the name of every screen
accessed is listed.
Unregisters from user interface screen
unregister
changes.
Changes the user interface to display the
"screen_name"
specified screen. The supported screens
depend on the system configuration. To
determine the name to use for a specific
screen, navigate to that screen in the user
interface and send the screen command.
Feedback Examples
● screen
returns
screen: adminsettings
if the Admin Settings screen is currently displayed in the user interface
● screen register
returns
screen registered
● screen monitors
returns
screen: monitors
and displays the Monitors screen in the user interface
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
324