Hdci Camera Break-Out Analog Cable - Polycom RealPresence Group Series Reference Manual

HDCI Camera Break-Out Analog Cable

This cable breaks out the HDCI camera cable video and control signals to standard interfaces. This cable
can be connected to the EagleEye HD, EagleEye II, EagleEye III, or EagleEye View camera, but does not
support audio. The five BNC connectors can be used to carry YPbPr component video. The DB-9 connector
is used to connect to PTZ camera control interfaces. It is male HDCI to five female BNC and one female
DB-9.
Length
1ft (0.3 m)
Note: Drawings and part numbers are provided for reference only. Polycom claims no responsibility or
liability for the quality, performance, or reliability of cables based on these reference drawings, other
than cables provided by Polycom. Contact your Polycom distributor or Polycom Custom/Vertical
Products to order cables that meet the appropriate manufacturing tolerances, quality, and performance
parameters for your application.
Polycom, Inc.
Part Number RoHS Compliant
2457-23521-001 Yes
Universal Breakout Cable
Video Output
Composite Svideo Component
Red C
Green C Y
Blue
Cables
Pr
Y
Pb
78