autoshowcontent
Specifies whether to send content automatically when a computer is connected to the system.
Syntax
autoshowcontent <get|on|off>
Parameter
Description
Returns the current setting.
get
Sets the system to send content automatically
on
when a computer is connected to the system.
Sets the system to not send content
off
automatically.
Feedback Examples
● autoshowcontent on
returns
autoshowcontent on
● autoshowcontent off
returns
autoshowcontent off
● autoshowcontent get
returns
autoshowcontent off
Limitations
None
Comments
None
Polycom, Inc.
System Commands
User
Accessible
Additional Restrictions
✓
138