Audio And Content Integration; Connect A Polycom Realpresence Group Microphone To A Polycom Realpresence Group; System - Polycom RealPresence Group Series Reference Manual

Audio and Content Integration

The following sections describe how to connect equipment to RealPresence Group Series systems to
enable audio and content sharing capabilities.
Connect a Polycom RealPresence Group Microphone
to a Polycom RealPresence Group System
You can connect a Polycom RealPresence Group Series microphone to a Polycom RealPresence Group
system using the RealPresence Group Microphone Array Walta-Walta
Caution: Be very careful to plug in the microphone array with the correct plug
orientation. If while plugging in the connector you feel undue pressure or that you
need to "force" the cable for it to connect, the cable is likely being inserted in an
incorrect manner. This is a serious issue because an improper connection causes
the current to flow in a reverse polarity manner leading to high current that can
result in severe damage to the RealPresence Group system. For the correct cable
orientation, refer to the graphics below and the setup sheet that shipped with your

system.

When connecting a Polycom RealPresence Group Series microphone to a Polycom RealPresence Group
Series system, ensure that the cable is inserted correctly. When connecting the cable to a microphone, the
icon must be facing up. When connecting the cable to a RealPresence Group Series system or
Polycom SoundStation IP 7000 phone, the
Connect a RealPresence Group Series Microphone to a RealPresence Group 300 System:
Polycom, Inc.
icon must be facing up.
C
1
Room Integration
Cable.
59