Ldapusername - Polycom RealPresence Group Series Reference Manual

ldapusername

Gets or sets the user name for NTLM authentication of an LDAP server.
Syntax
ldapusername get
ldapusername set ["user name"]
Parameter Description
Returns the current setting.
get
Sets the user name for NTLM authentication of
set
an LDAP server. To erase the current setting,
omit the "user name" parameter.
Note: This parameter does not change the
setting on the server. Instead, this parameter
changes how the Polycom system recognizes
the server.
Specifies the user name for NTLM
"user name"
authentication of an LDAP server.
Valid characters include:
Unicode (ISO-10646) characters, including
IA5/ASCII characters and extended characters
such as é, Ø, and å.
Feedback Examples
● ldapusername get
returns
ldapusername jpolycom
● ldapusername set mpolycom
returns
ldapusername mpolycom
Limitations
None
Comments
None
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
272