Polycom RealPresence Group Series Reference Manual page 22

Connect a Polycom EagleEye Acoustic Camera as the Main Camera to a RealPresence
Group 310 or 500 System:
1
Connect a Polycom EagleEye Acoustic Camera as the Main Camera to a RealPresence
Group 700 System:
1 2
100-240VAC 50/60Hz 2.3A
1
Use the Polycom EagleEye III Camera as the Main Camera
You can connect a Polycom EagleEye III camera (part number 1624-08283-002, 8200-63730-001 or
8200-63740-001) to a Polycom RealPresence Group Series system as the main camera using:
Option 1
● HDCI Analog Camera Cable
● Power supply. Power supply is only required if you want to use the IR remote to wake the system
when it is in sleep mode on RealPresence Group 700 systems. Use only the approved power supply
from Polycom (part number 1465-52748-040). Do not exceed 12 Volts at 3 Amps. Verify the polarity
of the power supply as shown on the Polycom camera next to the power supply input.
Polycom, Inc.
1
1
4
3
1
2 3
Room Integration
31