Ldapntlmdomain - Polycom RealPresence Group Series Reference Manual

ldapntlmdomain

Gets or sets the domain in which authentication takes place in the Active Directory server.
Syntax
ldapntlmdomain get
ldapntlmdomain set ["domain"]
Parameter Description
Returns the current setting.
get
Sets the domain in which authentication takes
set
place in the Active Directory server. To erase
the current setting, omit the "domain"
parameter.
Note: This parameter does not change the
setting on the server. Instead, this parameter
changes how the Polycom system recognizes
the server.
Specifies the domain in which authentication
"domain"
takes place in the Active Directory server.
Valid characters include:
0 through 9, a through z, A through Z,
hyphen (-), and period (.)
Note: The domain name cannot begin or end
with a hyphen or a period.
Feedback Examples
● ldapntlmdomain get
returns
ldapntlmdomain AUSTIN
● ldapntlmdomain set ANDOVER
returns
ldapntlmdomain ANDOVER
Limitations
None
Comments
None
Polycom, Inc.
System Commands
User
Accessible Additional Restrictions
267