Archive Upload-Sw - Cisco Catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

archive upload-sw

Use the archive upload-sw privileged EXEC command on the switch stack or on a standalone switch to
upload an existing switch image to a server.
Syntax Description /source-system-num
stack member number
/version version_string
destination-url
Defaults Uploads the currently running image from the flash: file system.
Command Modes
Privileged EXEC
Command History Release
12.1(11)AX
Usage Guidelines
You must specify the /source-system-num option to use the /version option. Using these options
together uploads the specified image, not the running image, of a specific stack member.
Use the upload feature only if the HTML files associated with the embedded device manager have been
installed with the existing image.
78-16181-03
archive upload-sw [/source-system-num stack member number | /version version_string]
destination-url
Specify the specific stack member containing the image that is to be
uploaded.
(Optional) Specify the specific version string of the image to be uploaded.
The destination URL alias for a local or network file system. These options
are supported:
•
•
•
•
The image-name.tar is the name of software image to be stored on the
server.
Modification
This command was introduced.
The syntax for the local flash file system on the standalone switch or
the stack master:
flash:
The syntax for the local flash file system on a stack member:
flash member number:
The syntax for the FTP:
ftp:[[//username[:password]@location]/directory]/image-name.tar
The syntax for the Remote Copy Protocol (RCP):
rcp:[[//username@location]/directory]/image-name.tar
The syntax for the TFTP:
tftp:[[//location]/directory]/image-name.tar
Catalyst 3750 Switch Command Reference
archive upload-sw
2-17