Decommissioning And Cleaning - WAGNER GM 4700AC-H Translation Of The Original Operating Manual

VERSION 09/2011
OPERATING MANUAL
6.1

DECOMMISSIONING AND CLEANING.

Exploding gas / air mixture!
Danger to life from fl ying parts and burns
Cleaning agent in the air duct!
Functional faults caused by swollen seals
Always point the spray gun down when cleaning.
Ensure that neither paint nor cleaning agents enter the air duct.
Explosive atmosphere!
Explosive gases are produced when aluminium comes into contact
with halogenized hydrocarbons.
Note:
Methylene chloride is not recommended as a fl ushing or cleaning solvent with this gun
or any system components.
1. Relieve the pressure of gun and unit.
2. Secure gun with locking device.
3. Connect the detergent supply.
4. Remove AirCoat nozzle and clean separately (See chapter 5.4.3).
5. Pressurize the cleaning supply to a maximum pressure of 4 MPa; 40 bar; 580 psi
and thoroughly fl ush the spray gun.
6. Relieve the pressure of gun and unit.
7. Secure gun with locking device.
8. Clean the spray gun body with a cleaning agent recommended by the
manufacturer and dry with a cloth or blow gun.
ORDER NUMBER DOC
DANGER
Never spray into a closed container.
Ground the container.
NOTICE
WARNING
To clean aluminium, do not use liquids containing halogenized
hydrocarbons.
2311730
GM 4700AC
25