Cleaning And Maintenance; Cleaning; Cleaning Personnel; Decommissioning And Cleaning - WAGNER EvoMotion 40-15 S-HE Translation Of The Original Operating Manual

EDITION 10/2017
8

CLEANING AND MAINTENANCE

8.1

CLEANING

8.1.1 CLEANING PERSONNEL

Cleaning work should be undertaken regularly and carefully by qualified and trained
personnel. They should be informed of specific hazards during their training.
The following hazards may arise during cleaning work:
− Health hazard from inhaling solvent vapors.
− Use of unsuitable cleaning tools and aids.

8.1.2 DECOMMISSIONING AND CLEANING

The device should be cleaned for maintenance purposes, etc. Ensure that no remaining
product dries on and sticks to the device.
Procedure
1. Carry out work interruption
2. Carry out the basic flushing
3. Empty system in a controlled manner
4. Service spray gun in accordance to its operating instructions.
5. Clean and check the suction system and the suction filter.
6. Clean the outside of the system.
7. Fully assemble the system.
8. Check fill level of the separating agent
9. Fill the system with flushing agent in accordance with Chapter 8.2.5.

8.1.3 LONG-TERM STORAGE

If storing the system for a prolonged period of time, thorough cleaning and corrosion
protection are necessary. Replace the water or solvent in the product pump with a suitable
preserving oil and fill the separating agent cup with separating agent.
Procedure
1. Perform points 1 to 7 in Chapter 8.1.2.
2. Fill with preservative according to Chapter 8.2.5.
3. Empty system in a controlled manner according to Chapter 8.2.4.
ORDER NUMBER 2351778
Chapter 7.4.
Chapter 7.5.
Chapter 8.2.4.
Chapter 8.2.3.1.
EvoMotion 40-15 S-HE
EvoMotion 20-30 S-HE
34