Table of Contents
Advertisement
Figure 78. Removing the cable cover
3
Use the Phillips #1 screwdriver to remove the screws that connect the control panel to the system.
Figure 79. Removing left control panel
4
Hold the control panel by its sides, and then remove the control panel away from the system.
Next step
Install the
left control
panel.
Installing the left control panel
Prerequisite
Follow the safety guidelines listed in
Steps
1
Route the control panel cable through the side wall of the system.
2
Align the left control panel assembly with the control panel slot on the system and attach the control panel assembly to the system.
3
Connect the control panel cable to the system board connector and secure it using cable latch.
4
Use the Phillips #1 screwdriver to install the screws that secure the control panel to the system.
118
Installing and removing system components
Safety
instructions.
- Quick Links:
- Front View of the System
Hide quick links:
Advertisement
Table of Contents
