Installing A Drive Blank; Removing A Drive Carrier - Dell EMC Storage NX3340 Installation And Service Manual

Figure 54. Removing a drive blank
Next step
1 Install a drive or a drive blank.

Installing a drive blank

Prerequisite
Follow the safety guidelines listed in
CAUTION: Mixing drive blanks from previous generations of storage systems is not supported.
Step
Insert the drive blank into the drive slot, and push the blank until the release button clicks into place.
Figure 55. Installing a drive blank
Next step
If removed, install the front bezel.

Removing a drive carrier

Prerequisites
1 Follow the safety guidelines listed in
2 If applicable, remove the front bezel.
3 Use the management software to prepare the drive for removal.
Safety instructions.
Safety instructions
Installing and removing system components 95