Installing A Power Supply Unit - Dell EMC Storage NX3340 Installation And Service Manual

Figure 73. Removing a power supply unit
Next step
Install the PSU or the PSU

Installing a power supply unit

Prerequisites
1 Follow the safety guidelines listed in
2 For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum output
power.
NOTE: The maximum output power (shown in watts) is listed on the PSU label.
Step
Slide the PSU into the system until the PSU is fully seated and the release latch snaps into place.
blank.
Safety instructions
Installing and removing system components 111