Installing An Expansion Card Riser - Dell EMC Storage NX3340 Installation And Service Manual

Figure 39. Removing the expansion riser 2A
Next step
Install the expansion card riser.

Installing an expansion card riser

Prerequisites
1 Follow the safety guidelines listed in
2 Before installing the expansion card riser 2A, install
Steps
1 If removed, install the expansion cards into the expansion card riser.
2 Hold the touch points, and align the expansion card riser with the connector and the riser guide pin on the system board.
3 Lower the expansion card riser into place until the expansion card riser connector is fully seated in the connector.
84 Installing and removing system components
Safety instructions
an expansion card into the riser, if applicable.