Backplane Cover; Removing The Backplane Cover - Dell EMC Storage NX3340 Installation And Service Manual

Figure 20. Installing the system cover
Next steps
1 Reconnect the peripherals and connect the system to the electrical outlet.
2 Turn on the system, including any attached peripherals.

Backplane cover

Removing the backplane cover

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedures in
3 Remove the system cover.
Steps
1 Slide the backplane cover in the direction of the arrows marked on the backplane cover.
2 Lift the backplane cover away from the system.
NOTE: The images shown here are for representation only and the actual configuration of your system may vary.
60 Installing and removing system components
Safety instructions
Before working inside your system