System Health And System Id Indicator Codes; Nic Indicator Codes - Dell EMC Storage NX3340 Installation And Service Manual

System health and system ID indicator codes

The system health and system ID indicator is located on the left control panel of your system.
Figure 12. System health and system ID indicators
System health and system ID indicator
code
Solid blue
Blinking blue
Solid amber
Blinking amber

NIC indicator codes

Indicators on each NIC provide information about the activity and link status. The activity LED indicator indicates if data is flowing through
the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 13. NIC indicator codes
1 link LED indicator
Status
Link and activity indicators are off
Link indicator is green and activity indicator is blinking green The NIC is connected to a valid network at its maximum port speed and
Link indicator is amber and activity indicator is blinking
green
Condition
Indicates that the system is turned on, system is healthy, and system ID mode is not active.
Press the system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID button to
switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists, see the Getting help
section.
Indicates that the system is experiencing a fault. Check the System Event Log or the LCD
panel, if available on the bezel, for specific error messages. For more information about error
messages, see the Dell Event and Error Messages Reference Guide at Dell.com/
openmanagemanuals > OpenManage software.
Condition
The NIC is not connected to the network.
data is being sent or received.
The NIC is connected to a valid network at less than its maximum port
speed and data is being sent or received.
2 activity LED indicator
Diagnostics and indicators 47