Recommended Tools; Front Bezel; Removing The Front Bezel - Dell EMC Storage NX3340 Installation And Service Manual

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Key to the bezel lock
• Phillips #1 screwdriver
• Phillips #2 screwdriver
• 1/4 inch flat head screwdriver
• Torx #T30 screwdriver
• Wrist grounding strap

Front bezel

The metal bezel mounted on the front of the system displays the system branding. A lock on the bezel protects unauthorized access to the
drives.
The bezel is available with LCD panel that displays system status. For more information, see

Removing the front bezel

To remove the front bezel:
Prerequisite
Follow the safety guidelines listed in
Steps
1 Unlock the bezel using the bezel key.
2 Press the release button, and pull the left end of the bezel.
3 Unhook the right end, and remove the bezel.
NOTE: The images shown here are for representation only and the actual configuration of your system may vary.
Figure 17. Removing the front bezel
Safety instructions.
LCD panel.
Installing and removing system components 57