Display Unit And Operation; Touchscreen; Operating Panel - HEIDENHAIN TNC 640 User Manual

3
3.1

Display unit and operation

Touchscreen

Refer to your machine manual.
This feature must be enabled and adapted by the
machine tool builder.
The touchscreen is distinguished by a black frame and the lack of
soft-key selection keys.
1 Header
When the control is on, the screen displays the selected
operating modes in the header.
2 Soft-key row for the machine tool builder
3 Soft-key row
The control shows further functions in a soft-key row. The
active soft-key row is shown as a blue bar.
4 Switchover between machine operating modes, program-
ming modes, and a third desktop
5 Setting the screen layout

Operating panel

The control can still be operated through the operating panel. Touch
operation with gestures works as well.
Basic operation
The following keys, for example, can easily be replaced by hand
gestures:
Key
128
Function
Switch between operating
modes
Shift the soft-key row
Soft-key selection keys
Operating the Touchscreen | Display unit and operation
Gesture
Tap on the operating mode in the header
Swipe horizontally over the soft-key row
Tap on the function in the touchscreen
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017
1
2
5
4
3