Ethernet Interface(For Software 548328- Xx) - HEIDENHAIN 548431-05 User Manual

9

Ethernet interface(for software 548328- xx)

Network configuration settings:
Control name: Computer name of the control
DHCP (Dynamic Host Configuration Protocol)
ON: The network settings are automatically configured by a
DHCP server
OFF: The other network settings have to be configured
manually:
(Static) IP address
Subnet mask
Broadcast
Gateway
Network connection settings (SMB):
Protocol: SMB – Windows network
Host: IP address or host name: Computer name or IP address
of the target computer
Host: Share name: Share name of the target computer
User name for logging on to the target computer.
Workgroup / domain: Name of the workgroup or domain
Password for logging on to the target computer
Network connection settings (NFS):
Protocol: NFS
Host IP address: IP address of the target computer
Host: Share name: Share name of the target computer
rsize
wsize
time0
soft
folder: The control reads and writes all the data to/
Select project
from a predefined project folder. Each project folder mirrors the
folder structure on the control. Select the project folder you want to
connect to. If no project folder exists in the target path, the folder
is created when connecting.
646
Organization mode of operation | Transfer submode
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017