Adding A Scheduled Event Macro; Copying A Macro - Christie Mirage SST-6P User Manual

Adding a Scheduled Event macro

Create a Scheduled Event macro to automate a repetitive task.
Up to 24 macros can be created.
This feature is only available on the web interface.
1. From the home page of the web interface, select Macros and GPIO.
2. Click the Add Macro.
If the limit of 24 macros is reached, the Add Macro button is disabled and displays a Limit
Reached message.
3. In the Name field, enter a meaningful name for the macro.
4. From the Type list, select Scheduled Event.
5. In the Start Date field, select a date from the calendar.
6. In the Start Time field, use the up and down keys to adjust the hour (HH), minutes (MM), and
seconds (SS).
You can also manually enter the hour, minutes, and seconds.
7. To make this a reoccurring event, click Recurring.
When enabled, the button appears green. When disabled, the button appears gray.
a) To determine the recurrence pattern, under Every, select the day or days of the week you
want run the macro.
b) Determine the life of the macro.
• To have the macro run indefinitely, select No end date.
• To run the macro for a defined period of time, in the Recur for field, use the up and
down keys to adjust the number of weeks.
You can also manually enter the number of weeks. The limit is 99 weeks.
8. In the Serial Command field, enter the serial command(s) you want to run.
For available serial commands and their syntax, refer to the Mirage SST Serial Commands
Guide (P/N: 020-103005-XX).
9. To test the functionality, click Test.
An Action succeeded message is displayed upon a successful test.
10. To save the macro, click Save.
If the time specified in a macro has expired, a warning icon depicting an expired macro is displayed in
the title bar.

Copying a macro

Duplicate a Scheduled Event macro to create another macro of similar functionality.
Up to 24 macros can be created. GPIO Event macros cannot be duplicated.
This feature is only available on the web interface.
1. From the home page of the web interface, select Macros and GPIO.
Mirage SST User Guide
020-102993-06 Rev. 1 (10-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Configuring communications
49