Warping And Blending; Adding A Projector; Channel Network Indicators; Shuttering A Projector - Christie H Series User Manual

Warping and blending

Hide thumbs Also See for H Series:

Table of Contents

Warping and blending

The projector provides three major functions: warp, edge blending, and black leveling.

Connect to the projector before performing any warping and blending. The software can only be

connected to one projector at a time.

1. On the General tab, set the resolution of the new projector.

2. Enter the IP address of the projector.

3. Select Connect.

4. To connect to a different projector, repeat steps 1 to 3.

The Channel Network icons provide information about the connection to the Channel Network.

Icon

Description

Indicates disconnection from the channel network.

Indicates connection to the channel network. The selected channel appears in a blue box.

Indicates the connection to the channel network is asleep.

Indicates the selected channel.

Follow these steps to shutter a projector.

When warping and blending more than two projectors, to having a better visualization shutter for the

projectors not being adjusted.

1. Switch to the Warp tab.

2. In the Blank area, select Enable.

H Series, HS Series, GS Series and Inspire Series User Guide–Warping and Blending

020-000807-03 Rev. 1 (01-2024)

If printed, please recycle this document after use.

Table of Contents