Preparing For Commissioning; Preparing To Commissioning A Plc; General Instructions - Festo CTEU-DN Description, Functions And Maintenance

3. Preparing for commissioning

3.1

Preparing to commissioning a PLC

3.1.1 General instructions

Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
The following sections contain fundamental instructions on
commissioning the bus node on the DeviceNet.
Detailed instructions and further information can be found in
the documentation or online help for the controller or control
program.
Note
– Bus node CTEU-DN can be used on all DeviceNet control-
lers.
– This chapter describes the configuration and
commissioning procedure using the example of
Rockwell/Allen-Bradley controllers (PLC) via the
RSNetWorx and RSLogix software platform.
– Higher-order controller (PLC) is also called DeviceNet
Master or Host System.
– The DeviceNet fieldbus system is referred to below as
network.
3-3