Entering Participant Properties Manually - Festo CTEU-DN Description, Functions And Maintenance

3. Preparing for commissioning

3.2.5 Entering participant properties manually

Information
Vendor name
Vendor ID
Device type
Product code
Major revision / Minor revision
Input size / output size
Product name
Tab. 3/14: Participant characteristics of the CTEU-DN bus node
3-12
When an EDS file is installed, the following information about
the DeviceNet participant is added to the EDS library. This
information can also be entered manually.
Description
Dependent on the connected I-port device
When the EDS library has been extended, the valve terminal
is entered in the participant list as a possible DeviceNet
participant. It can now be added to the DeviceNet network
Section 4.1 and 4.2.
Festo AG & Co. KG
26 / (0x1A)
d
12 / (0xC)
d
6000 / (0x1770)
d
1/1
CTEU-DN
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH