4. Commissioning
4.2.3 Set the I/O parameters of the participant (Standard EDS)
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
1
Button for assigning the participant
Fig. 4/2: "Scanlist" tab - assign the network participant to a
scanner (example)
1. Select a participant from the "Scanlist" (Fig. 4/2). After
double clicking the selection, the dialogue box for setting
the I/O parameters is displayed.
2. Set the I/O parameters of the participant in the "Polled"
field. Confirm with OK.
1
4-7