Table of Contents
Advertisement
4. Commissioning
Changing parameters
Transmitting parameters
4-14
Click on a value (Current Value) and change it in the list field
or in a window that opens separately.
The settings saved in the project are displayed in offline
mode.
In online mode, you can transmit the required parameters
("upload") and then display them ("download").
Please note:
–
The displayed parameters are not automatically updated.
–
In online mode too, only the settings and parameter val-
ues that are current when called will be displayed.
(It takes a certain amount of time to transmit and display
the values).
–
Values that are continuously current are displayed only in
monitor mode, although not with details (no sub-groups
or detailed values).
You can find notes about the specific CTEU-DN parameters in
DeviceNet in section 4.3.3.
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
Advertisement
Chapters
Table of Contents
