2. Installation and interfaces
2.1.2 Mounting the bus node
2-4
Note
The bus node includes electrostatically sensitive devices.
Do not touch any electrical or electronic components.
•
Observe the handling specifications for electrostatically
•
sensitive devices.
They will help you avoid damage to the electronics.
Note
Use protective caps to seal unused connections. This is
how you achieve protection class IP65/IP67.
A valve terminal with I-port interface or an electrical connec-
tion box, type CAPC-..., is required to mount the bus node.
Note
Information on mounting the bus node on the electrical
connection box type CAPC-... can be found in the assembly
instructions that accompany the connection box.
For H-rail mounting, you also need the mounting kit
CAFM-... (CAPC and CAFM).
1. Inspect the seals and sealing surfaces on bus node and
valve terminal.
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH