Festo Parameter Object - Festo CTEU-DN Description, Functions And Maintenance

A. Technical appendix
A.4.10 Festo parameter object
Attribute Access
Class attributes
Get
1
2 Get
2)
Instance attributes
1 Get/Set
2 Get/Set
3 Get/Set
4 Get/Set
5 Get/Set
6 Get/Set
7 Get/Set
8 Get/Set
Note
Write access to these objects and instances is possible only if an I-port-compatible device is connec-
ted to the corresponding I-port.
1)
The specific contents (description, "parameters" and "values") of the objects and instances de-
pend on the connected I-port device.
2)
Instance 1 refers to the module indentity of Device 1; Instance 2 to module indentity of Device 2.
Tab. A/21: Festo parameter object – Class code 106
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
Object class:
The Festo parameter object is a DeviceNet object relating to
CTEU-DN for the device-specific parameterisation.
Name Type
Revision UINT
Max instance UINT
Parameter byte 1 BYTE
Parameter byte 2 BYTE
Parameter byte 3 BYTE
Parameter byte 4 BYTE
Parameter byte 5 BYTE
Parameter byte 6 BYTE
Parameter byte 7 BYTE
Parameter byte 8 BYTE
106
d
Description
Revision of the object
Max. instance
CIP object
d
1)
Value
1
2)
of the 2
A-25