Downloading And Installing An Eds File - Festo CTEU-DN Description, Functions And Maintenance

3. Preparing for commissioning

3.2.4 Downloading and installing an EDS file

EDS file
Icon files
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
The current EDS file can be found on the Festo website
www.festo.com
"CTEU-DN" Firmware and driver: "DeviceNet EDS file for
CTEU-DN".
File type
EDS download file
(archive file)
EDS file
Icon file
Tab. 3/13: Configuration files (Standard EDS) for CTEU-DN
Install the EDS file using the configuration software of the
higher-order controller (PLC). Please refer to the manuals or
the Online Help for the PLC software for procedures.
Note
The old EDS file is overwritten when a new EDS file is
loaded (installed).
Depending on the configuration program used, you can as-
sign an icon to the bus node. This icon appears at the config-
uration program user interface and represents the bus node
or the CTEU installation system.
Most configuration programs install the icon automatically.
Manual installation is not usually required.
Support Portal Enter search term:
File name
Festo_CTEU-DN_EDS_...zip
Cteu-dn.eds
CTEU-DN.ico
3-11