1. Introduction
1.1.3 CTEU-DN function range on the DeviceNet (brief overview)
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
–
Object-based fieldbus system
–
Master-Slave system architecture
–
Process synchronisation in accordance with the Producer/
Consumer method
–
Connection-based communication procedure: point-to-
point connection (peer-to-peer messaging), where applic-
able as Multicast connection and/or Master/slave I/O
connection
–
Predefined master/slave connection set for the simplified
transmission of I/O data between the master and the PLC
and the slave and the bus node
–
Real-time operation: Exchange of I/O data in "real-time"
–
Message types supported for the Master/slave I/O con-
nection:
–
Polled communication ("I/O polling")
–
Change of state / Cyclic communication
–
Supports the QuickConnect feature and the Automatic
Device Replacement (ADR) function: guarantees faster
reconnection between DeviceNet-Scanner and bus nodes,
e.g. after replacing the bus nodes
–
Application-specific process data transmission based on
the Common Industrial Protocol (CIP):
–
Time-critical I/O data via "I/O messages"
(I/O messaging or implicit messaging)
–
Data required for configuration, diagnostics and
management via explicit messaging
–
Module-specific parameterisation via manufacturer-spe-
cific objects
1-5