Interfaces; Connection And Display Components - Festo CTEU-DN Description, Functions And Maintenance

2. Installation and interfaces
2.2

Interfaces

2.2.1 Connection and display components

2-6
The following electrical connection and display components
can be found on the bus node:
5
1
DIL switch group 1 (
2
DIL switch group 2 (
3
Status LEDs:
bus status LEDs, CTEU-specific LEDs;
status indicator and diagnostics (
4
Power supply connection
for bus node and any connected equipment,
e.g. valve terminal (
M12, 5-pin, B-coded, pin plug connector
5
Field bus connection (field bus interface):
sub-D, 9-pin, pin plug connector, DE-9
( Section 2.2.3)
On the bottom of the bus node is the I-port interface for con-
nection to an I-port-compatible device, e.g. valve terminal or
decentralised electrical connection box.
1 2 3
Section 2.2.6)
Section 2.2.6)
Section 2.2.2);
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
4
Section 3.2.2)