Festo CTEU-DN Description, Functions And Maintenance page 43

2. Installation and interfaces
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
2. Remove the bus node from the electrical connection box:
Dismantling/Installation
3. Replace the electrical connection box.
To mount/dismount the electrical connection box,
observe the corresponding product documentation
(assembly instructions) CAPC-F1-E-M12-D2
www.festo.com
e.g. "CAPC-F1-E-M12-D2"
4. Install the bus node on electrical connection box.
The bus node detects the connected I-port device and
transfers the saved configuration and parameterisation to
the I-port device. Transmission of process data starts
automatically.
Section 2.1.
Support Portal: Enter search term,
User documentation.
2-21