Diagnostics; Summary Of Diagnostics Options - Festo CTEU-DN Description, Functions And Maintenance

5. Diagnostics

5.1

Summary of diagnostics options

Diagnostic Brief description
possibility
Diagnostics via Bus node LEDs indicate
LED display configuration errors, hardware
errors, bus errors, etc.
immediately
Diagnostics via Detailed diagnostics via the
fieldbus DeviceNet network,
transmission of diagnostic
information to the process data
Tab. 5/1: Diagnostics options
1
DIL switch
settings:
– OFF:
Diagnostic
information only
via explicit
messaging
(factory setting)
– ON:
Diagnostics
activated
Fig. 5/7: DIL switches for diagnostic information
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
The following options are available for diagnostics and error
elimination, depending on the bus node configuration:
Benefits
Fast "on-the-spot"
recognition of errors
Detailed fault recognition
Further information relating to the DIL switches on the bus
node can be found in Part I of the product documentation
entitled "Installation and Interface manual", which is supplied
with the bus node.
Detailed
description
Section 5.2
Section 5.3
1
5-3