Festo CTEU-DN Description, Functions And Maintenance page 74

4. Commissioning
Attribute Access
Class attributes
Get
1
2 Get
2)
Instance attributes
1 Get/Set
2 Get/Set
3 Get/Set
4 Get/Set
5 Get/Set
6 Get/Set
7 Get/Set
8 Get/Set
Note
Write access to these objects and instances is possible only if an I-port-compatible device is connec-
ted to the corresponding I-port.
1)
The specific contents (description, "parameters" and "values") of the objects and instances
depend on the connected I-port device.
2)
Instance 1 refers to the module indentity of Device 1; Instance 2 to module indentity of Device 2.
Tab. 4/17: DeviceNet object relating to CTEU-DN for the device-specific parameterisation
(Festo parameter object) – Class code 106
4-18
Name Type
Revision UINT
Max instance UINT
Parameter byte 1 BYTE
Parameter byte 2 BYTE
Parameter byte 3 BYTE
Parameter byte 4 BYTE
Parameter byte 5 BYTE
Parameter byte 6 BYTE
Parameter byte 7 BYTE
Parameter byte 8 BYTE
Further information on parameter programming with a user
program (via explicit messaging) can be found in the data on
your controller.
1)
Description
Revision of the object = 1
2)
Max. instance of the CIP object = 2
d
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH