Example 3: Removing A Tie From A Set Of Ties - Extron electronics DXP DVI Pro User Manual

The configuration now is:
• Input 5 video tied to output 1, output 3, output 4, and output 8
• Input 5 audio tied to output 3, output 4, and output 8
Figure 23.
Breaking Ties
To undo an existing I/O tie:
1. Press the I/O button (Video, Audio, or both) for the type of tie you want to break.
2.
Press the input button whose tie you want to dissolve. The input button and its tied
output buttons light red, green, or amber, depending on your selection in step 1 and on
the types of ties the selected input currently has.
3. Press the desired lit output button. The selected output button and the Enter button
start to blink.
4. Press the Enter button. The selected input and output buttons and the Enter button
become unlit, and the tie is broken.
Example 3: Removing a Tie from a Set of Ties lets you practice this procedure.

Example 3: Removing a Tie from a Set of Ties

In the following example, an existing tie is removed from the current configuration. The steps
show the front panel indications that result from your action.
NOTE: This example assumes that you have performed examples 1 and 2.
1. Press and release the Esc
Press the Esc button to clear all
ENTER
Figure 24.
Example 2, Final Configuration
>
button.
selections.
C O N T R O L
VIEW ESC
PRESET
The button blinks once.
Clear All Selections
DXP DVI Pro and DXP HDMI Series • Operation 23