Software Operation Via Ethernet - Extron electronics DXP DVI Pro User Manual

3.
On the Download Center page, click the M link (see figure 71,
Matrix Switchers software panel (
Figure 71.
4. Click the Download link (
5. On the login screen that appears, enter the required information and your Extron ID,
then click Log In. If you do not have an Extron ID, contact your Extron representative
to obtain one.
6. Follow the instructions on the following screens to download and install the Matrix
Switchers Control Program.
By default, the software installation creates a C:\Program Files (86)\Extron\
Matrix Software directory and places two files (MATRIX Switcher + Control Program
[MTRX.exe] and MATRIX Switcher + Help [MTRX.hlp]) in it. The software program occupies
approximately 1 MB of hard-drive space.

Software Operation Via Ethernet

When a DXP switcher is connected to an Ethernet WAN or LAN, any number of users can
operate it, locally or remotely, using the Matrix Switcher Control Program. See
Connection
Connection to the switcher via Ethernet can be password protected. There are two levels
of password protection: administrator and user. Administrators have full access to all DXP
switching capabilities and editing functions. Users can select inputs and outputs, set and
recall presets, and view all settings with the exception of passwords. If the same password
or no password is required for logging on, all personnel are logged on with administrator
privileges. Fields and functions that exceed user privileges are grayed out in the control
program when the operator is logged on as a user.
Matrix Switchers Link on Download Center Page
) at the right of the Matrix Switchers panel.
3
on page 9 for connection details.
DXP DVI Pro and DXP HDMI Series • Matrix Software
1
).
2
) to display the
Ethernet
75