Ip Setup - Extron electronics DXP DVI Pro User Manual

IP Setup

The
IP Settings/Options
RS-422 link or logged on via the Ethernet port as an administrator, edit settings unique to
the Ethernet interface. To display the IP Settings/Options window, select IP Options
from the Tools pull-down menu.
Figure 80.
ATTENTION:
•
Editing the following fields or checkboxes on the IP Settings/Options screen
while connected via the Ethernet port can immediately disconnect your computer
from the switcher:
•
•
•
• Modifier les champs ou cases à cocher suivants sur l'écran Paramètres/Options
lorsque vous êtes connecté via le port Ethernet peut déconnecter immédiatement
votre ordinateur du sélecteur :
•
•
•
NOTES:
• Extron recommends editing the settings on this screen using the RS-232 or RS-422
link and protecting the Ethernet access to this screen by assigning an administrator
password to qualified and knowledgeable personnel only.
• When the control program is connected to the DXP via RS-232 or RS-422, the
Administrator Password and User Password fields are not masked. If a
password has been inadvertently changed to an unknown value, you can look up
and, if desired, change a password in this window without knowing the current
password.
window lets you view and, if connected via the RS-232 or
IP Settings/Options Window
IP Address
Gateway IP Address
Subnet Mask
Adresse IP
Masque de sous-réseau
Utilisez les cases à cocher DHCP
DXP DVI Pro and DXP HDMI Series • Matrix Software
• Use DHCP
checkbox
• Administrator Password
• Passerelle d'adresse IP
• Mot de passe administrateur
82