Front Panel Controls And Indicators - Extron electronics DXP DVI Pro User Manual

•
•

Front Panel Controls and Indicators

All models of the DXP have the same front panel with the same controls and layout. The
front panel buttons are grouped into two sets, with the input and output buttons located on
the left side of the control panel and the control buttons on the right.
These illuminated push buttons can be labeled with text or graphics. You can set the
buttons to have amber background illumination all the time, or you can disable the
illumination (see
on the operation, the buttons blink or light steadily when pressed.
The front panel buttons have multiple functions. In the descriptions on the following pages,
primary functions are preceded by a square () and secondary functions are preceded by a
bullet (
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A
B
C
D
E
Figure 10.
Room preset — A configuration consisting of outputs in a single room that has
been stored. When a room preset is retrieved from memory, it becomes the current
configuration for the outputs assigned to that room only (none of the other outputs are
affected).
I/O Group — One of four possible subdivisions of the front panel matrix into smaller
functional sub-switchers. Inputs and outputs can be assigned to one of these groups or
not assigned to any group (see
Setting the Button Background Illumination
•
).
A A
INPUTS
OUTPUTS
B B
Input buttons
Output buttons
Config port
Enter button
Preset button
DXP Switchers Front Panel
I/O Grouping on page 32).
CONFIG
C C D D E E F F G G H H I I
<
View button
F
>
Esc button
G
Video button
H
Audio button
I
DXP DVI Pro and DXP HDMI Series • Operation
on page 44). Depending
CONTROL I/O
VIEW ESC
ENTER PRESET VIDEO AUDIO
DXP SERIES
DIGITAL CROSSPOINT MATRIX SWITCHER
13