Resetting Using The Rear Panel Reset Button - Extron electronics DXP DVI Pro User Manual

Resetting Using the Rear Panel Reset Button

The rear panel has a recessed Reset button that initiates various levels of resets. For
different reset levels, press and hold the button while the switcher is running or press and
hold the button while you apply power to the switcher. Use a pointed stylus, ballpoint pen, or
small Philips screwdriver to press the button.
ATTENTION:
• Review the reset modes in the following table carefully. Using the wrong reset mode
could result in unintended loss of flash memory programming, port reassignment, or
a controller reboot.
•
Analysez minutieusement les différents modes de réinitialisation. [voir tableau page
suivante]. Appliquer le mauvais mode de réinitialisation peut causer une perte
inattendue de la programmation de la mémoire flash, une reconfiguration des ports
ou une réinitialisation du processeur.
NOTES:
• The reset modes listed in the table close all open IP and Telnet connections and all
sockets.
•
The modes described in the table below are separate functions, not a continuation
from mode 1 to mode 5.
• There is no reset mode 2 for DXP.
DXP DVI Pro and DXP HDMI Series • Operation 41