Maintenance And Modifications; Removing And Installing A Module - Extron electronics FOX3 Matrix Series Setup Manual

Hide thumbs Also See for FOX3 Matrix Series:

Table of Contents

Figure 15.

Internal Web Main Page

NOTE:

For detailed information about the internal web page, see the FOX3 Matrix Series User Guide available at

www.extron.com.

Maintenance and Modifications

This section describes repairing and reconfiguring the FOX3 Matrix switchers by replacing components.

NOTE:

All the diagrams in this section show the 40x frame, which is similar in function to all the other matrix frames.

The I/O module, control card and audio card can all be added or replaced by the user. Input/Output modules can be added

or removed to increase or decrease the I/O configuration (size) of the switcher. The control card can be upgraded with the

FOX3 Matrix IPCP Pro Control Card. The Audio card can be replaced.

WARNING:

The fiber optic I/O modules of the FOX3 Matrix switchers output continuous invisible light, which may be

harmful to the eyes; use with caution.

Do not look into the fiber optic cable connectors or into the fiber optic cables themselves.

Plug the attached dust caps into the optical transceivers when the fiber cable is unplugged.

AVERTISSEMENT:

précaution.

Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière ou dans les câbles fibre optique eux-

mêmes.

Branchez les protections contre la poussière dans l'ensemble émetteur/récepteur lorsque le câble fibre optique est

débranché.

L'appareil émet une lumière invisible en continu qui peut être dangereuse pour les yeux ; à utiliser avec

Table of Contents

Do you have a question about the FOX3 Matrix Series and is the answer not in the manual?