Example 2: Adding A Tie To A Set Of Video Ties - Extron electronics DXP DVI Pro User Manual

Example 2: Adding a Tie to a Set of Video Ties

In the following example, a new tie is added to the current configuration. The illustrations
show the front panel indications that result from your actions.
NOTE: This example assumes that you have performed example 1.
1.
Press and release the Esc
Press the Esc button to clear all
ENTER
Figure 18.
2. To select only video for the tie, press and release the Video and Audio buttons as
necessary until the Video button is lit and the Audio button is off.
Press the Video button to toggle video on.
The button lights green when selected.
Figure 19.
3.
Press and release the Input 5 button.
1
Figure 20.
4. Press and release the Output 1 button.
Press and release the Output 1 button.
The button blinks green to indicate that the
selected video input will be tied to this output.
1
Figure 21.
5. Press and release the Enter button.
Press the Enter button to
confirm the configuration
change.
ENTER
The Enter button
becomes unlit or returns to
background illumination.
Figure 22.
>
button.
selections.
C O N T R O L
VIEW ESC
PRESET
The button blinks once.
Clear All Selections
I / O
VIDEO AUDIO
Press the Audio button to toggle audio off.
Select Video Only
Press and release the Input 5 button.
The button lights green to indicate that video
outputs can be tied to or untied from this input.
INPUTS
2 3 4 6 7
5
Select an Input with Ties
2 5 6 7
3 4
OUTPUT
Select an Additional Output
All input and output buttons
become unlit or return to
background illumination.
Confirm the Tie
The Output 3, Output 4, and Output 8
buttons light green to indicate the video ties
created in example 1.
1 2 3
8
CONTROL
8
VIEW
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.
DXP DVI Pro and DXP HDMI Series • Operation
4 5 6 7 8
OUTPUT
ESC
22