Replacing Button Labels - Extron electronics DXP DVI Pro User Manual

4. Edit the selected button by using any of the tools provided on the Button Label
Generator window. Some of the edits you can make are:
Enter text and select the font, text size, and text color from the drop-down menus
•
on the tool bar.
Select an icon from the Button Picture Palette and drag it to a button.
•
Place a bitmap image from your computer on a selected button.
•
To remove all the text or the image from a selected button, click Clear Button. To
remove the text and images from all the buttons, click Clear All Buttons.
To access the Button Label Generator help, select Use Help from the Help menu.
5. After creating the labels, print them by selecting Print from the File drop-down
menu in the upper-left corner of the Button Label Generator window. To save the
button label set as an .xml file on your computer, select Save As from the File menu
and enter a name for the label file.

Replacing Button Labels

The button assembly consists of a clear lens cap, the button label, and a white diffuser.
Remove the button assembly from the DXP as follows:
1. Remove the button assembly by inserting a small, flat-bladed screwdriver, such as
an Extron Tweeker, between the button base and the diffuser to gently pry the button
assembly off the button plunger, as shown in figure 105.
Clear Lens
Separating the two-
piece button here at
the corner.
Figure 105.
2.
Locate the small corner notch on the clear lens cap, and slide the screwdriver between
the lens cap and the diffuser (
3. Using a rotating motion of the screwdriver, carefully pry the two pieces apart (
4. Lift out the transparent square label that you want to replace, being careful not to
damage the circuits beneath it. You may need to use the small screwdriver to gently pry
the label out.
5. Insert one of the new labels you created in before starting into the clear button cap,
align the white backing plate with the cap, and firmly snap it into place.
6.
Gently, but firmly, press the reassembled button into place on the DXP front panel.
7. Repeat steps 1 through 6 as needed to relabel other buttons.
Plunger
T E
X T
Diffuser
2 2
Button Label
Pry the two
1 1
pieces apart.
Notch
Replacing a Button Label
).
1
DXP DVI Pro and DXP HDMI Series • HTML Operation
Base
2
).
105