Managing Ties - Extron electronics DXP DVI Pro User Manual

2.
Click and drag an icon from the devices screen to an input or output box on the matrix
window. Repeat for additional devices as desired.
3. In the Caption box, enter a caption for the device, if desired (for example, Camera 2).
This caption appears in the descriptive window that pops up when you pass the cursor
over an input or output box containing an icon (see figure 78).
Figure 78.
4. When finished assigning icons, click OK to close the device window.
To change an icon in an input or output box, drag the new icon to the box. It
•
replaces the previous one.
To remove an icon from a box and leave the box empty, drag an empty square
•
to the box.
Alternatively, you can display the input and output numbers in the boxes instead of
icons. To do this, select Numbers in I/O Boxes from the Preferences drop-down
menu.

Managing Ties

On the matrix window, you can create, dissolve, and view input-to-output ties as follows:
• To create a tie, click and drag from an input box to an output box.
If Hold/Verify Changes has been selected from the Preferences menu:
•
A broken line appears, connecting the two boxes. If you want to undo the
preliminary tie at this point, click the Cancel button. The broken line disappears.
Click Take to confirm the tie. The broken line becomes solid.
If Immediate Changes has been selected from the Preferences menu:
•
The tie is made immediately. No
To create a quick multiple tie, drag the desired input box to the word "Out" above
•
the output column. The input is tied to all the outputs, replacing any existing ties.
• To remove a tie, drag the output box to its tied input box or to the trash can.
If Hold/Verify Changes has been selected from the Preferences menu:
•
The tie line becomes broken. If you want to reinstate the tie at this point, click
Cancel. The broken line becomes solid again. Click Take. The broken tie line
disappears.
If Immediate Changes has been selected from the Preferences menu:
•
The tie is undone immediately.
Pop-up Window for Input 4 Containing a Caption
Cancel
DXP DVI Pro and DXP HDMI Series • Matrix Software
button is displayed.
80