Viewing A Configuration - Extron electronics DXP DVI Pro User Manual

The configuration now is:
•
•
•
Figure 29.

Viewing a Configuration

You can view the current set of video and audio ties using the front panel buttons. The view-
only mode prevents inadvertent changes to the current configuration. View-only mode also
provides a way to mute outputs (see
on page 36).
View the current configuration as follows:
1.
2.
3.
4.
Input 5 video tied to output 1, output 3, output 4, and output 8
Input 5 audio tied to output 3 and output 8
Input 5 video and audio tied to output 3 and output 8
Example 3, Final Configuration
>
Press the Esc button to clear any remaining input, output, or control button
selections.
Press and release the View
follows:
Amber: No tied video or audio input
•
Green: No tied video input
•
Red: No tied audio input
•
Select video, audio, or both to view by pressing the Video and Audio buttons.
Select the desired input or outputs whose ties you wish to view by pressing the input
and output buttons.
Muting and Unmuting Video and Audio Outputs
<
button. All output buttons that are not tied light as
DXP DVI Pro and DXP HDMI Series • Operation 25