Operation; Definitions - Extron electronics DXP DVI Pro User Manual

Digital matrix switchers
Hide thumbs Also See for DXP DVI Pro:
Table of Contents

Advertisement

Operation

This section describes the DXP front panel controls and the procedures for configuring and
operating the DXP switchers. Topics include:

Definitions

The following terms, which apply to Extron digital matrix switchers, are used throughout this
guide:
Definitions
Front Panel Controls and Indicators
Powering On
Creating a Configuration
Viewing a Configuration
Saving and Recalling Presets
I/O Grouping
Muting and Unmuting Video and Audio Outputs
Locking and Unlocking the Front Panel (Executive Modes)
Resetting
Setting the Button Background Illumination
Selecting the RS-232/RS-422 Port Protocol and Baud Rate (Rear Panel))
Troubleshooting
Configuration Worksheets
Tie — An input-to-output connection
Set of ties — An input tied to two or more outputs. (An output can never be tied to
more than one input.)
Configuration — One or more ties or sets of ties
Current configuration — The configuration that is currently active in the switcher (also
called configuration 0)
EDID (Extended Display Identification Data) — Resolution, refresh rate, pixel clock,
and audio channel configuration information for a display device. This information
is stored in memory at system power-up and each time a new display device is
connected. The EDID is then made available to be assigned to any input.
Global preset — A configuration that has been stored. Up to 32 global presets can
be stored in memory. Preset locations are assigned first to the input buttons, then if
when all input buttons have presets assigned, to the output buttons. All models have 16
presets available from the front panel and 32 through RS-232/RS-422 or Ethernet.
When a preset is retrieved from memory, it becomes the current configuration.
Room — A subset of outputs that are logically related to each other, as determined by
the operator. The switchers support up to 10 rooms, each of which can consist of 1 to
16 outputs. Each room can have up to 10 presets.
DXP DVI Pro and DXP HDMI Series • Operation
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxp hdmi

Table of Contents