Special Characters; Accessing The Software - Extron electronics DXP DVI Pro User Manual

Ethernet protocol settings
The IP Settings/Options screen (see
for viewing and, if connected via the RS-232 or RS-422 link or, if you are logged on via the
Ethernet port as an administrator, editing settings unique to the Ethernet interface (see
Setup on page 82).

Special Characters

The HTML language reserves certain characters for specific functions. The switcher does
not accept these characters in preset names, the switcher name, passwords, or locally
created file names. Use of the following characters is not recommended: {space} (spaces
can be used in names) + ~ , @ = ` [ ] { } < > ' ' " " ; : | \ and ?.

Accessing the Software

Many items in the Matrix Switcher Control Program are also accessible via front panel
controls (see
and Control
starting on page 107). The Matrix Switcher Help Program provides information on settings
and on how to use the control program, itself.
1.
To run the Matrix Switcher Control Program, click on the
Matrix Switcher + Control Pgm icon (shown at right) in
the Extron Electronics group or folder in the Start menu. You
can access this icon by selecting:
Start > All Programs > Extron Electronics >
Matrix Switchers > Matrix Switcher + Control Program
The Comm Port Selection window opens (see figure 72).
Figure 72.
Operation starting on page 12), under SIS control (see
starting on page 49), and via the web pages (see the
Comm Port Selection Window
DXP DVI Pro and DXP HDMI Series • Matrix Software
figure 80 on page 82) provides a location
SIS Configuration
HTML Operation
IP
76