1/2.5/5/10Gbps Twisted Pair Ports On The At-X550-18Xspqm Switch; Cable Requirements; Table 5: 1/2.5/5/10Gbps Twisted Pair Ports On The At-X550-18Xspqm Switch - Allied Telesis x550 Series Installation Manual

1/2.5/5/10Gbps Twisted Pair Ports on the AT-x550-18XSPQm Switch

Cable
Requirements
The specifications for twisted pair ports 1 to 8 on the AT-x550-18XSPQm
Switch are listed in Table 5.
Table 5. 1/2.5/5/10Gbps Twisted Pair Ports on the AT-x550-18XSPQm
Specification
Port Speed
Duplex Mode
Maximum Distance
Power over Ethernet
Power Budget
PoE Mode
Connector
Note
The network devices connected to the ports must be IEEE 802.3u
compliant.
The cable requirements for the PoE+ twisted pair ports on the AT-x550-
18XSPQm Switch are listed in Table 6 on page 26 and Table 7 on
page 26.
x550 Series Installation Guide for Stand-alone Switches
Switch
Description
1Gbps, 2.5Gbps, 5Gbps, or 10Gbps
You can set port speed with Auto-
Negotiation or manually. Guidelines are
given here:
- 1Gbps and 10Gbps can be set either
manually or with Auto-Negotiation.
- 2.5Gbps and 5Gbps must be set with
Auto-Negotiation.
The default port setting is Auto-
Negotiation.
Full-duplex only
100 meters (328 feet)
PoE (15.4 watts maximum) and PoE+ (30
watts maximum)
240W
Mode A
8-pin RJ-45
25