Alarm Area; Time Control Area - Mitsubishi Electric Melsec Q Series User Manual

3
SPECIFICATIONS

3.4.11 Alarm area

This area is used for the alarm acquisition.
(1) Alarm request area (Un\G26432 to Un\G26434)
(2) Alarm response area (Un\G26446 to Un\G26768)

3.4.12 Time control area

This area is used for the time control.
(1) Time control setting request area (Un\G26784 to Un\G26792)
(2) Time control setting response area (Un\G26800 to Un\G26812)
3
- 51 3.4 Buffer Memory
3.4.11 Alarm area
Set request data for alarm acquisition in this area. (Initial value: 0000
For the request format, refer to Section 7.5.
The execution result of alarm acquisition is stored in this area. (Initial value: 0000
For the response format for the execution result, refer to Section 7.5.
Set request data for the time control setting in this area. (Initial value: 0000
For the request format, refer to Section 7.6.
The execution result of the time control setting is stored in this area. (Initial value:
0000 )
H
For the response format for the execution result, refer to Section 7.6.
)
H
)
H
)
H